Philips Universal Remote Codes: How to Find and Program Them

TechZerg is reader supported. When you purchase through links on our site, we may earn a commission.

Are you looking for the right Philips universal remote codes to control your TV, DVD, or cable box? Do you want to know how to program your Philips universal remote to work with your devices? In this article, we will guide you through the process of finding and using Philips universal remote codes step by step.

What is a Philips Universal Remote?

A Philips universal remote is a remote control that can be programmed to operate multiple devices from different brands and models. It eliminates the need for separate remotes for each device and simplifies the control of your entertainment system. Philips offers a wide range of universal remotes that are compatible with most major brands and devices.

How to Find Philips Universal Remote Codes?

To find the correct Philips universal remote codes for your devices, you need to follow these steps:

1. Identify the device you want to control with your Philips remote, such as your TV, DVD player, or cable box.
2. Turn on the device (TV, DVR, etc.) you want to operate using the Philips universal remote.
3. Press and hold the SETUP button on the remote until the red light indicator remains lit. Then, release the SETUP button.
4. Press and release the desired mode button for the device you want to program (e.g., TV, DVR). The red light indicator will flash and then remain lit.
5. Look up the 4-digit code for your device in the code table provided below. Enter the code using the number buttons on the remote.
6. Once you have entered the code, aim the remote at the device and press several buttons to test if the device responds. For example, try adjusting the volume or changing the channels on your TV. If the device responds properly to the remote commands, you have successfully found a valid code for your device.
7. If you have other devices that you want to program the Philips remote for, repeat steps 1 to 5 for each device, using the appropriate mode button (e.g., TV, DVD, Blu-ray).

By following these steps, you should be able to program your Philips universal remote to control multiple devices in your home. Remember to refer to the instruction manual or contact Philips support if you encounter any difficulties or need further guidance.

Note:

• After successfully entering a valid code for your device, the red light indicator on the remote will turn off. This indicates that the code has been accepted and the remote is now programmed to operate the device.
• If you enter an invalid code, the red light indicator will flash briefly and then turn off. In this case, you will need to enter the setup mode again by pressing and holding the SETUP button until the red light indicator remains lit. Then, you can try entering a different code from the code table.
• If you find that some buttons on the remote do not operate your device even after entering a valid code, you can try using one of the other codes listed for your device’s brand in the code table. Follow the same steps to enter setup mode, select the appropriate mode button, and enter a different code.

TV Brands and Philips Universal Remote Codes

How to Program Philips Universal Remote?

To program your Philips universal remote to work with your devices, you need to follow these steps:

1. Turn on the device you want to control with your Philips remote.
2. Press and hold the “Code Search” button on your Philips remote until the red light blinks.
3. Press the button for the device you want to control, such as “TV” or “DVD.”
4. Enter the code for your device using the number buttons on your Philips remote.
5. Press the “Power” button on your Philips remote to see if the device responds.
6. If the device responds, you have successfully programmed your Philips remote. If not, repeat the process with a different code or try the code search method.

Philips Universal Remote Troubleshooting

If you encounter issues with your Philips universal remote, such as not working with your device or not responding to commands, you can try these troubleshooting tips:

• Make sure your Philips remote is programmed correctly with the right device code.
• Check the batteries in your Philips remote and replace them if they are low.
• Ensure that your devices are compatible with your Philips remote and are not faulty.
• Reset your Philips remote to its default settings and try programming it again.
• Contact Philips customer support for further assistance if needed.

The bottom line

In conclusion, finding and programming Philips universal remote codes is not difficult if you follow the right steps and troubleshooting tips. A Philips universal remote can simplify your entertainment system and enhance your viewing experience. With this guide, you can take control of your devices with ease and convenience. If you need more help, don’t hesitate to contact Philips customer support or consult the manual for your specific Philips remote model.